1300 286 307 sales@sundriven.com.au

Solar Cables

Solar cable is the interconnection cable used in photovoltaic power generation. A solar cable interconnects solar panels and other electrical components in the photovoltaic system. Solar cables are designed to be UV resistant and weather resistant. It can be used within a large temperature range and are generally laid outside.

The cable’s insulation must be able to withstand thermal and mechanical loads. As a consequence, plastics which have been cross-linked using an electron beam are increasingly used today. The insulation and jacket materials are extremely resistant to weathering, UV-radiation and abrasion. Additionally, it is salt water resistant and resistant to acids and alkaline solutions. It is suitable for fixed installation as well as for moving applications without tensile load. It is especially designed for outdoor use, which means direct sun radiation and air humidity, but due to the halogen free flame retardant cross-linked jacket material the cable can also be installed in dry and humid conditions indoors.

All DC solar cables used for the run from the roof to the inverter are Australian made and are of the highest quality are flame retardant, use zero halogen, UV resistant, rated up to 1500V DC and are compliant with international standard PV1-F.

Leave A Message or Get A Quote

Service Requested

Solar Type

Solar Pump System Type

Electricity Usage (check your latest bill)

Our Roof is

Panels go on roof facing:

Roofing Material

8 + 4 =

PV1-F Solar Cable

[vc_row][vc_column width="2/3"][vc_column_text] PV1-F Solar Cable Flexible Power for Solar Applications PV1-F Solar Cable TYPICAL APPLICATIONS Solar DC applications, DC power and garden lighting. CONSTRUCTION CONDUCTOR: Fine stranded tinned annealed copper to IEC...

read more

MC4 Connectors

[vc_row][vc_column width="2/3"][vc_column_text] MC4 Connectors MC4 connectors are single-contact connectors commonly used for connecting photovoltaic panels. MC4 stands for the manufacturer Multi-Contact and a 4 mm2 contact assembly pin. The MC4 connector is UL rated...

read more

MC3 Connectors

[vc_row][vc_column width="2/3"][vc_column_text] MC3 Connectors MC3 connectors are a type of single contact connector commonly used for connecting photovoltaic panels. MC3 stands for "Multi Contact" with a 3mm² contact assembly pin. They are typically rated at 20...

read more