TBS Powersine Combi

[vc_row][vc_column width=”2/3″][vc_column_text]

Combined Inverter, Battery Charger and AC Transfer Switch

TBS Powersine Combi products are based on the latest generation Powersine inverter engine, which guarantees very reliable operation and huge output power reserves. The Powersine Combi also features a powerful intelligent battery charger and an ultra fast AC transfer switch. All this is combined in a very compact, yet installer friendly unit.
The fully integrated power system solution from TBS. A DC to AC sinewave inverter, programmable battery charger and automatic AC transfer switch all in one device…
When AC power is available, the TBS Powersine Combi recharges the house batteries. It also allows any surplus AC power to pass through and power downstream AC loads, such as a television or microwave oven. When AC power is disconnected, the unit inverts DC battery power into clean AC electricity.
The TBS Powersine Combi offers many innovative features like AC Input Power Boost, which temporarily assists weak AC input sources when more power is needed than available. Another feature is AC Input Current Limit, which limits the maximum current consumed from the AC input source by the TBS Powersine Combi in charger mode.
Furthermore, the TBS Powersine Combi is equipped with a TBSLink port to connect to a TBS Remote Control or to a Windows device for easy step by step configuration and readout through the TBS Dashboard software.
Also available are a fully configurable alarm relay output and a unique trigger input, that can convert external trigger commands into a number of TBS Powersine Combi status changes. All this is combined in a very compact, yet installer friendly unit.[/vc_column_text][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]

Features

True sinewave AC output
Robust design
High surge power output
Very efficient
Powerful 4-stage battery charger
Power factor corrected AC input
Fast AC transfer switch
AC Input Power Boost
AC Input Current Limit (adjustable)
Protected against high/low battery voltage, high temperature, overload, short circuit, low AC input voltage and high ripple voltage
Automatic Standby function to reduce no-load power consumption
Variable speed fan for silent operation
Remote on/off capability
Remote control capability via TBSLink
Easy to access connection bay for installing AC- and control wiring
CE certified
24 month warranty

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]

Applications

Recreational vehicles
Solar power systems
Industrial systems
Service vehicles
Maritime applications

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_column][vc_column width=”1/3″][contact-form-7 id=”2456″][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

Specifications	PSC1600-12-60	PSC1800-24-35
Inverter section
DC Input voltage	12V	24V
Output power (nominal)	1300W	1400W
Output power (10 minutes)	1600W	1800W
Output power (peak)	2500W	3000W
Output voltage	230Vac ± 2%
Output frequency	50Hz ± 0.05% or 60Hz ± 0.05%
Output waveform	True sinewave (THD < 5% @ Pnom)
Maximum efficiency	92%	94%
Charger section
AC input voltage	185 – 270V (45 – 65Hz)
Maximum charging current	60A	35A
Standard charge voltage (@ 25 °C)	14.3V	28.6V
Charge algorithm	Automatic 4-stage with temp. compensation
General
Indications	Power on, output power bar, output current bar, stage of charge bar, AC present, error (flash sequence shows type of error)
Protections against	Short circuit, overload, low AC input voltage, high temperature, low battery voltage and high ripple voltage
DC connection	Two wires, length 1.5 meters, ø 35mm²
AC connections	3-pole screw terminal
Enclosure size	351 x 114 x 210mm (including mounting brackets)
Protection class and operating temperature	IP21 and -20 °C to +50 °C
Total weight	10.7 kg

_{NOTE: The given specifications are subject to change without notice.}[/vc_column_text][/vc_column][/vc_row]

TBS Powersine Combi