[vc_row][vc_column width=”2/3″][vc_column_text]

Sundriven Titanium Sublimation PumpSundriven Titanium Sublimation Pump Product

Sundriven Titanium Sublimation Pump I5 – 14 – 600 is a centrifugal solar pump system, especially designed for swimming pool filtration and recirculation.

  • flow rate up to 9000 L/ hour
  • excellent serviceability
  • maintenance free DC motor thanks to brush-less technology
  • excellent efficiency
  • short Return on investment cycle


  • swimming pool water circulation through a filter system and thermal collectors
  • pond management
  • irrigation
  • aquariums


  • 2 years


  • brushless maintenance-free DC motor
  • no electronics inside the motor
  • premium materials

[/vc_column_text][/vc_column][vc_column width=”1/3″][contact-form-7 id=”2456″][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]


  • centrifugal pump with integrated strainer tank
  • bellow mechanical seal is mounted on a plastic shaft protected sleeve
  • motorpump shaft has no contact with fluid
  • total electrical separation
  • strainer capacity approx. 2 L
  • strainer basket mesh size approx. 2.0 × 2.0 mm
  • sturdy materials used for pump end and casing lid
    • PC, transparent mechanical seal bolts: stainless steel
  • max. efficiency 88 % (motor + controller)
  • enclosure: lP 54 (sealed weatherproof)

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]

Controller RTES5020B

  • controlling of the pump system and monitoring of the operating states
  • mounted at surface (no submerged electronic parts)
  • two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
  • automatic reset
  • protected against reverse polarity overload and high temperature
  • speed control max. pump speed adjustable to reduce flow rate
  • solar operation: integrated MPPT (Maximum Power Point Tracking)
  • battery operation: low voltage disconnect and restart after battery has recovered
  • max. efficiency 88 % (motor + controller)

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]


Will the system work with my type of filter?

The Suni Solar Pool Pump works effectively with both cartridge type filters and sand filters. It does not perform well with DE (Diatomaceous Earth) filters.

Will the system work with my type of pool filter?

The Suni Solar Pool Pump works effectively with all types of pool cleaners that operate from the filter box i.e. Kreepy Krawly, Polaris,Barracuda etc.Underfloor and “pop up” type pool cleaning system require peak sunlight and may not work effectively.

Will the system work with my type of chlorinator?

In most cases yes. Most modern Chlorinators have a low flow switch that will turn the chlorinator off when the water flow is insufficient and back on again when there is sufficient flow.

Can I still manually vacuum my pool?

Yes, but to do this effectively you will need to do it during peak sun light hours of the day (generally between 10am and 4pm in summer). Outside of these hours and on heavily clouded days, you simply run your current AC pump that remains installed on your system.

Can I install the system myself?

The system is easy to install and comes with installation instruction for all components. If you use the kit provided input voltages of the panels don’t surpass > 120 V DC. warranty will not apply to damage from incorrectly installed components e.g. reversed polarities.
All electrical connections which go above > 120 V DC or > 50 V AC must be carried out by a qualified electrician.

Pump Specifications:

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text el_class=”table-with-border”]

Item Solar Operation
Flow Rate Max 9000L/h ; 9m2 /h ;2377US Gal/h 8500L/h ; 8.5m2 /h ;2245US Gal/h
Lift Max 18m/59ft 18m/59ft
Operation Temperature + 6 C° to + 45 C°
Input Voltage Solar PV Source DC: Battery Source DC:
Nominal Voltage 48VDC Nominal Voltage 48VDC
VOC max 100 VDC
IP Rating IP 54
Motor Brushless
Dimensions in mm 500 x 265 x 175
Weight (net / packed) 3.5kg / 4.5kg
Insulation class F
Max suction; positive inlet lift 3m
Casing max pressure 2.5 bar
Efficiency 0.88
WARNING: Do not let the motor run dry for more than 5 Min. Before using the pump ensure the top body of the pump is filled with water.


Kit Inclusions

No. Item
1 Solar Pool Pump 15 L- 14M-600
Solar Panels up to 600W
1 DC Junction Box
10 Solar Cable 4mm 2/m
1 Sunlock Mounting rail –size depending on panels used
2 Mid Clamps (32-46mm)
4 End Clamps (32-46mm)
8 Tin /Tile Roof Brackets

[/vc_column_text][/vc_column][vc_column width=”1/3″][/vc_column][/vc_row]