Raylite Solar Batteries

[vc_row][vc_column width=”2/3″][vc_column_text]

Raylite Solar Batteries

Raylite solar batteries were established in 1931, first national battery is a leading manufacturer of lead acid batteries in South Africa. First national battery acknowledges that superior technology, consistent product quality and dedicated customer service are minimum requirements to enable the company to maintains its position as an industry leader. The company produces more than 2,000,000 batteries annually to provide electrical power for passenger cars, trucks, tractors, forklift trucks, boats, railway, locomotives, power station, switch yards, remote home areas, solar system, computers and telecommunications equipment.[/vc_column_text][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text][/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]

Positive Plate

The tubular plate construction incorporates low antimony lead alloy spines in complete contact with the active material, whichis retained by an outer gauntlet. This enables the electrolyte to penetrate freely, ensuring a high power output per unit volume.

Top-up Level Indicator

Two ribs on the separator guard serve both as level indicators, and to strengthen the guard.

Negative Plate

The negative plate is of a highly porous paste on a lead alloy grid. This complements the positive plate construction, providing a balanced performance and superior life.

Mud Trap

Prevents possible shorting between plates due to active material shedding during the life of the cell.

Container and Lid

The lid is heat-sealed to the container ensuring an excellent bond. This is vital to mechanical strength and safety.[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text]

Wrap-around Sleeve Separator

Microporous polyethylene is specially calendered with ribs. Fully enclosed plates cannot develop “mossing” or shorts between the plates. Extended battery life is achieved using sleeved plates.[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text][/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text][/vc_column_text][vc_column_text]

Santoprene® Connectors

• Made of Thermoplastic Rubber
• Acid Resistant
• Abrasion Resistant
• Fatigue Resistant
• Access for Easy Voltage Checking
• More Flexible than PVC Cable
• Exceptional Moulding Bond Eliminates Contamination
• Built in “O” Rings
• Easy and Simple to Connect.

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]

Perfect Seal Ⓡ Bolt-On Connector

Injection Moulded Connector Head

The bolt-on connector facilitates easy cell replacement. Acid resistant, toally enclosed terminal post, maximum safety. Orifice forvoltage readings.

Stainless Steel Bolt

Corrosion resistent.

Threaded Brass Insert

Maximises terminal connector conductivity.

Perfect Seal®

A polypropylene pressure bushing seated on a rubber “O” ring, locked in place by a polycarbonate ring. The cell is welded to thecontainer, and polypropylene is injection moulded into the post to lid cavity. This design eliminates acid leaks through thepost assembly.[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text][/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]

Float Level Indicator

• Max/Min Mark: Clearly visible and easy to read.
• Closed Cell Float: Ensures consistent accuracy over cell life.

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_column][vc_column width=”1/3″][contact-form-7 id=”2456″][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

Battery Specification

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

[/vc_column_text][/vc_column][/vc_row]