Enerdrive Magnasine Range

[vc_row][vc_column width=”2/3″][vc_column_text]

Enerdrive Magnasine Range

The World Standard in Inverter/Charger Technology

The Enerdrive Magnasine range is designed specifically for rugged recreational vehicle, marine or stand alone system use. The Enerdrive Magnasine range of products are designed and produced in the USA utilising a tried and proven robust design platform, by a leading manufacturer of premium inverter/chargers for Mobile and Renewable Energy applications. With more than 70 years of combined inverter manufacturing and design experience, which has resulted in the Enerdrive Magnasine range being one of the industry’s most reliable and advanced inverter/chargers.

• Ultimate reliability and REAL surge capabilities
• High output, power factor corrected battery charger (programmable)
• Stable Pure Sine Wave power under ALL conditions
• Auto Transfer of AC Power via changeover switch
• Easy to install with plug and play add ons such as Auto Generator Start, Battery Monitors and Remote Monitoring

[/vc_column_text][vc_column_text]

MS-E / MS-PE

Magnasine now offers three 230VAC/50Hz pure sine wave inverter/charger options for mobile and grid/off grid applications. The 12v MS-E and the 24v-48v MS-PE Series are powerful, easy-to-use, and best of all, cost effective. Install the MS-E & MS-PE Series in four easy steps: Simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility/generator power cable to the inverters easy-to-reach terminal block, connect the batteries, and switch on the power.
When the power requirements of the system are beyond the capacity of a single MS-PE Series inverter or the system is expandable as more loads are added. Up to four MS-PE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads.[/vc_column_text][vc_column_text]The ME-RC50 comes standard with all Magnasine Combi’s. It includes a 15 metre, 4 conductor (twisted-pair) telephone cable and includes nonvolatile memory (preserves adjustable settings, even if power to the remote or inverter is removed). The Magnasine remote control has all of the programming and operation functions included in an easy-to-use package.
The ME-ARC is simple to use, yet allows full set-up of all the standard and advanced features available in Magnasine inverters. The ME-ARC also has the option of controlling the advanced features of the ME-AGS-N Automatic Gen Start and the ME-BMK Battery Monitor Kit using a network connection to the inverter. This remote has convenient finger tip operation, including the new one knob programming.[/vc_column_text][/vc_column][vc_column width=”1/3″][contact-form-7 id=”2456″][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

ME-AGS-N

The ME-AGS-N is the Network version of Magnasine Automatic Generator Start (AGS) controllers. This version is setup and operated via a Magnasine Inverter and ME-RC or ME-ARC remote panel.
The ME-AGS-N has basic adjustments starting on battery voltage or temperature and has advanced start and stop settings based on: Time of day, Battery state of charge, Battery voltage, High temperature or Inverter load amps. Also includes the ability to manually turn the generator on and off, generator exercise, warm-up and cool-down.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

ME-BMK

The ME-BMK (Battery Monitor Kit) from Magnasine gives you a fuel gauge type of meter for your battery bank. It monitors the battery bank and reports the percentage state of charge, real time amps, voltage, amp-hours in/out, and the minimum/maximum DC volts. The ME-BMK includes the sense module, sense and communication cables plus a 500 amp shunt.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

ME-RTR

The ME-RTR or Router provides parallel capability for the MS-PAE Series inverters and includes many of the same features as the ME-ARC advanced remote control. The router is designed with a user-friendly LCD display and rotary SELECT knob that allows all connected MS-PAE series inverter/chargers to be programmed in sync without the need to program each inverter separately. The router will accommodate up to four MS-PE inverter/chargers in parallel plus accessories.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

MagWeb

There are a few additions you can add to your system. One such item is the MagnaSine MagWeb device to remote monitor the overall system performance. The MagWeb is a powerful and cost effective tool for remotely monitoring MagnaSine inverters and accessories. Installed on the MagnaSine network, the MagWeb provides live internet monitoring of the inverter, battery monitor, and automatic generator start module. Connecting to your “always on” internet connection using a Ethernet connection, the MagWeb makes live and historical conditions available to you.
The MagWeb constantly streams data to your personal web pages, providing details on Current Conditions, Current Settings, and Daily Summaries for historical records. The MagWeb can also monitor MagnaSine Accessories connected to the inverter, such as the ME-AGS-N Automatic Generator Start or ME-BMK Battery Monitor.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

[/vc_column_text][/vc_column][/vc_row]