[vc_row][vc_column width=”2/3″][vc_column_text]

Wattson SOLAR Pluswattson-solar-plus Energy Monitor

The energy monitor showing electricity generation, usage and net usage; Wattson Solar Plus energy monitor maximises returns on your Solar PV by giving you the green light to use your free electricity.

  • Measures and displays both electricity generation and usage in the home or office.
  • Glows green when more electricity is generated than used, showing when to use your free electricity.
  • Inverter independent, compatible with all inverter brands.
  • Easifit option to remove the need for a Henley Block or junction box.
  • Works with all solar, wind, hydroelectric 230 VAC, single and three phase generation systems.

The Wattson Solar Plus energy monitor allows you to see how much power you are generating, and how much you are using, on the same portable display.

The display shows electricity being generated and used in your home in real time, in cost, watts or kg carbon. Choose your preferred display from a selection of pre-set modes, in numbers and/or colours, for better visibility of your daily electrical activity.wattson solar plus colors

Wattson Solar Plus alerts you when you are generating more power than you are using by immediately glowing green. Being aware of excess generation allows you to maximise the returns on your PV system by understanding when to use your free electricity.[/vc_column_text][vc_column_text]

Installation

Wattson Solar Plus uses sensors that simply clip around the outside of electricity cables to get its power data. The data is then sent wirelessly from the transmitter to the display.

It works with 210V-240V single phase or 400V-460V three phase electricity supplies and uses flexible tariff structures to suit most pricing plans and feed-in-tariffs.

To self-fit the sensors, there needs to be access to either the live or neutral wire (single-core wires); if they are contained within a single big cable either side of the fusebox (consumer unit) then the sensors should be fitted professionally by a Solar Installer.

With the range of Wattson accessories, it is simple to: measure three phase supply, three phase generation, install Wattson Solar Plus in more complex environments as well as boost its functionality. Accessories are available from your usual Wattson supplier.

The two most common site environments are shown in the diagrams below.

Wattson Solar Plus is recommended for PV installations that include a Henley Block or junction box. Wattson Solar Plus with Easifit is recommended for all other installations.[/vc_column_text][/vc_column][vc_column width=”1/3″]

Product Enquiries

Product Name

Your Name

Your Email

Subject

Your Message

[/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]

Wattson Solar Plus with Henly Block or junction box

Wattson Solar Plus with Henly Block or junction box

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]

Wattson Solar Plus with Easfit

Wattson Solar Plus with Easfit

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

DISPLAY OPTIONS

Wattson has a single buttonto switch between display modes:

  • Grid: how much power is being imported from (+ve) or exported to (-ve) the grid
  • Usage: how much power is being used in real time
  • Solar: how much power is being generated
  • Total Energy Generated: a counter showing how much energy has been generated in kWh, money earned and carbon saved.
  • Colours only: current usage displayed using Wattson colour key
  • Night mode: reduces the number of lights that are on, reducing the amount of energy the display uses
  • Clock: time together with power in watts displayed.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]

FEATURES WATTSON SOLAR PLUS
Phases measured Standard unit measures single phase supply and single phase generation. Accessories are available for measuring 3 phase supply and/or 3 phase generation.
Cable diameter 12.5mm
Max power/current 11.5kW/50Amp per phase
Ambient light mode RGB LED
Transmitter/receiver 433.92Mhz transmitter receiver, approx. 100m through air & 30m range in buildings
Refresh rate 3 – 20 seconds user changeable
Transmitter power DC power (supplied) also optional battery power
USB 1.0 USB-A to USB mini-A cable supplied
Display log memory Continuously for 28 days
Currency display £, $, €, R, P, k, F
Software compatible Mac & PC
Packaged weight (g) 1150
Carton contents 12 units
Equipment compliance
with harmonised
standards
EN 61558-1:2005
EN 300-220-2 V2.3.1
EN 301 489-1 V1.9.2
EN 61326-1:2006
EN 61326-2-2:2006
EN 61010-1:2010

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]

COLLECTING DATA

The display’s internal memory can hold up to 28 days’ worth of measurements. Software is available on our website to export, view and analyse generation and usage activity over long periods of time. Simply plug the device into a computer using the USB cable included.

*FREE ELECTRICITY

As utility companies have decided not to pay hundreds of pounds per customer to install export meters, almost everyone gets paid as if they use
50% of the energy they generate and export 50% of it. That means homeowners get paid the same regardless of how much of their own generated
energy is actually used.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

ACCESSORIES

A range of accessories is offered for more flexible and convenient Wattson Solar Plus installations.

Easifit

For installations without a Henley Block / junction box, it is required for a correct usage reading on Wattson.

3 Phase Generation

All you need in order to measure three phase generation. Available with or without Easifit.

50 Amp Sensor Clips

Additional CT clips for three phase installations. Cable length is 0.75m.

3m Extension Cable

Three metre extension cables for when the sensor and transmitter are some distance apart.

TX for Wattson

Additional standard transmitter for Wattson. Ideal for PV systems with extra consumer units and sub-circuits.

TXact S0

A more precise sensor and transmitter to provide near meter level accuracy for the generation reading. Can measure up to three phases of usage with additional 50 Amp Sensor Clips.

Wattson Display

Additional display for those who wish to show their electricity generation and usage in two or more places.[/vc_column_text][/vc_column][/vc_row]